Reception Counter (6th and 7th Floors)

Auto-translated from Japanese

Original title: 窓口カウンター（６階、７階）

長崎県

Published: Sep 10, 2026

Updated: Sep 14, 2026

Source: jp_kkj

About This Opportunity

This is a supplies contract in the general supplies and construction and civil works sectors, with a focus on Rehabilitation and Office Equipment. Located in Japan, Asia, this opportunity is open to firms and consortiums.

Published through 官公需 (kkj.go.jp), a national government procurement portal. Public procurement tenders follow the country's national bidding regulations and may have specific eligibility and documentation requirements for the supply of goods in the general supplies sector. Supply contracts typically require bidders to demonstrate product compliance with technical specifications, delivery capacity, and relevant certifications. Interested parties should review the full documentation on the original source before submitting their proposal.

Description

Auto-translated from Japanese

Reception Counter (6th and 7th Floors) - 1 - Item Name: Reception Counter (6th and 7th Floors) 1. Specifications and Details (1) High Counter and Low Counter ① Outer dimensions shall be as follows: High Counter (Integrated Storage: Sliding Door Type): D550mm - 608mm, W1800mm - 1810mm, H950mm - 1000mm High Counter Corner Type: D600mm - 800mm, W600mm - 800mm, H950mm - 1000mm Low Counter (Frame Type): D800mm, W1800mm - 1810mm, H720mm - 730mm * The above W does not include connecting panels or connecting frames (connecting members). * The above H includes the top surface. ② Connecting panels, connecting frames, or other members with equivalent functions shall be used for a continuous system, allowing connection between high and low counters, between high counters, and between low counters. When connecting high counters, they must be connectable without a panel-type connecting member so that there is no partition between counters. (Metal fittings or frame-type connecting members are acceptable.) ③ High and low counters shall be equipped with a wiring hole for telephone lines. ④ For the low counter, the front panel (skirt) shall be installed so that the skirt surface is 460mm from the visitor's side (wheelchair accessible specification). ⑤ The doors of the high counter (integrated storage type: sliding door type) shall be sliding door type, 3-tier specification, and lockable. ⑥ The top surface color shall be wood grain or white, and the top surface material shall be melamine decorative board. * If multiple colors for the top surface or wood grain tones can be selected, they will be decided through consultation after the contract is concluded. ⑦ The front panel (skirt) shall be wood grain. * If multiple wood grain tones for the panel can be selected, they will be decided through consultation after the contract is concluded. ⑧ End panels of the same color as the top surface shall be installed at the ends of the counter. ⑨ The product shall be from a manufacturer affiliated with the "Japan Office Furniture Association (JOIFA)". 2. Quantity Counter Type 6th Floor 7th Floor Total High Counter (Integrated Storage: Sliding Door Type) 8 8 16 High Counter Corner Type 1 1 2 Low Counter (Frame Type) 2 2 4 The number of connecting members and connecting panels required shall be estimated according to the layout diagram attached, and they shall be connected and installed. 3. Example Products > ITOKI CORPORATION / NV Counter [6F] - NV-850CAS x 2, NV-887MS1 x 1, NVA-080RCMT1 x 1, NVA-087LMB1 x 1, NVA-060RCT x 1 - NV-850CAS x 3, NVA-060RCT x 1, NVA-060LCT x 1 - NV-850CAS x 2, NV-887MS1 x 1, NVA-080LCMT1 x 1, NVA-087RMB1 x 1, NVA-060LCT x 1 - NV-850CAS x 1, NV-590CES x 1, NVA-060RCT x 1 [7F] - NV-850CAS x 2, NV-887MS1 x 1, NVA-080RCMT1 x 1, NVA-087LMB1 x 1, NVA-060RCT x 1 - NV-850CAS x 3, NVA-060RCT x 1, NVA-060LCT x 1 - NV-850CAS x 2, NV-887MS1 x 1, NVA-080LCMT1 x 1, NVA-087RMB1 x 1, NVA-060LCT x 1 - NV-850CAS x 1, NV-590CES-SO x 1, NVA-060RCT x 1 - 2 - 4. Delivery Location and Deadline Delivery Location: Nan-ken Shinko Kyoku, 26-1 Nagamasa Higashi-machi, Isahaya City, Nagasaki Prefecture Delivery Deadline: February 15, Reiwa 9 (Monday) Delivery shall be made within the period specified by the client between January 18, Reiwa 9 and February 15, Reiwa 9. (Delivery is possible on Saturdays, Sundays, and public holidays.) (Delivery may be split into multiple times.) * Consultation with the Nagasaki Prefectural General Affairs Department Property Utilization Office will be held after the contract is concluded. 5. Delivery Conditions ① All delivered items must be from the same manufacturer. ② The contractor shall transport, deliver, assemble, and install the delivered items to the designated location (see attached layout diagram) by the delivery deadline, and both the contractor and the client shall inspect and accept the goods. ③ Delivery conditions such as entrance and elevator specifications are as per Attachment ①. ④ Protection during work has been carried out by the moving company within the scope of Attachment ②, but the contractor shall carry out protection as necessary for delivery. If the protection provided by the moving company is damaged, the contractor shall immediately contact the person in charge at the Nagasaki Prefectural General Affairs Department Property Utilization Office and restore it at the contractor's responsibility. ⑤ When delivering, consult with the person in charge at the Nagasaki Prefectural General Affairs Department Property Utilization Office in advance regarding the delivery route, parking, elevator usage, etc. ⑥ If any damage is caused to the facilities or equipment during delivery or installation, the contractor shall immediately contact the person in charge at the Nagasaki Prefectural General Affairs Department Property Utilization Office and restore it at the contractor's responsibility. ⑦ Packing materials, etc., shall be disposed of by the contractor. ⑧ The warranty period for free repair or replacement due to normal use after delivery shall be at least one year. 6. Other All costs required for transportation, delivery, and installation of delivered items shall be included in the bid price. 7. Precautions ① Deliver example products or equivalent products that meet the above specifications. When submitting a request for approval of equivalent products, attach a catalog or a specification certificate from the manufacturer (optional format) that confirms that the product intended for bidding meets the above specifications. ② The furniture for this procurement shall comply with the "Green Purchasing Law (Law Concerning the Promotion of Procurement of Eco-Friendly Goods and Services by the Government and Other Entities)" criteria. Reception Counter (6th and 7th Floors) (6th Floor) (7th Floor) High Counter (Integrated Storage: Sliding Door Type) D550mm - 608mm, W1800mm - 1810mm, H950mm - 1000mm High Counter Corner Type Low Counter (Frame Type) D800mm, W1800mm - 1810mm, H720mm - 730mm High Counter (Integrated Storage: Sliding Door Type) D550mm - 608mm, W1800mm - 1810mm, H950mm - 1000mm High Counter Corner Type Low Counter (Frame Type) D800mm, W1800mm - 1810mm, H720mm - 730mm D600mm - 800mm, W600mm - 800mm, H950mm - 1000mm D600mm - 800mm, W600mm - 800mm, H950mm - 1000mm

Data provenance

This notice is sourced from 官公需 (kkj.go.jp) and was originally published on September 10, 2026. Last refreshed 7 days ago. Original language: Japanese. BidsFactory mirrors official procurement notices and links back to the source for full legal text.

About 長崎県

長崎県 has issued 83 procurement notices on BidsFactory, including 36 currently open and 0 awarded contracts. Activity concentrates in General Supplies & Services, Information & Communication Technology, and Construction & Civil Works. All notices are published for Japan. Notices are distributed via 官公需 (kkj.go.jp). Most recent publication: September 18, 2026.

Frequently asked questions about this tender

What type of contract is this?

This is a Supplies contract in the General Supplies & Services sector. The classification helps bidders match the opportunity to their qualifications and registered scope of supply.

Where will the contract be performed?

The contract is for delivery in Japan. Foreign bidders should review local registration, taxation, and any in-country presence requirements before submitting.

How can I submit a bid?

Visit 官公需 (kkj.go.jp) to access the full notice, required documents, and submission instructions provided by the contracting authority.

Who is the contracting authority?

This notice was issued by 長崎県 in Japan. The authority is responsible for evaluating bids, awarding the contract, and managing performance.