Dynamic Purchasing System for Transport Container systems, PREFAB system, Design, Service and Repair/Maintenance
About This Opportunity
Supplies contract by Danish Ministry of Defence Acquisition and Logistics (Denmark): Dynamic Purchasing System for Transport Container systems, PREFAB.
This is a supplies contract in the transport and logistics, construction and civil works and information and communication technology sectors. Located in Denmark, Europe, this opportunity is open to firms and consortiums.
Published through Denmark Udbud, a national government procurement portal. Public procurement tenders follow the country's national bidding regulations and may have specific eligibility and documentation requirements for the supply of goods in the transport and logistics sector. Supply contracts typically require bidders to demonstrate product compliance with technical specifications, delivery capacity, and relevant certifications. Interested parties should review the full documentation on the original source before submitting their proposal.
Description
Dynamic Purchasing System for Transport Container systems, PREFAB system, Design, Service and Repair/Maintenance
DALO is looking to set up a Dynamic Purchasing System (hereafter DPS) for Container systems, PREFABS and service (hereafter CS-PREFAB). The DPS is a purchasing method, where an economic operator can apply for prequalification in the DPS.
The DPS is a purchasing method, where an economic operator can apply for prequalification in the DPS. Approved economic operators will be participants in the DPS. When an economic operator has been prequalified as participant in the DPS, the economic operator (now participant in the DPS) can submit offers on published tenders in the DPS. There is no limit on the number of economic operators that may join the DPS. New economic operators can also apply to join the DPS at any point during the lifetime of the DPS. Economic operators should note however, that admission into the DPS is not a guarantee of being awarded any contracts, and there is also no guarantee of volume or value of tenders in the DPS.
The DPS is divided into eight categories where it shall be possible to buy items and accessories.
Common characteristics for the container systems is that they are all corresponding to ISO container standards and have a variety of sizes from 10FT to 40FT with 20FT being the standard size. They are intended for common ISO handling tools and are to be transported via road, sea, air and rail - both nationally and internationally with all kind of goods. All of the Container Systems in this DPS is ex-pected to be or to be based on standard commercial products (COTS).
Category 1 – Standard Transport Container Systems - Used. These Container Systems will be used by the Danish Defence for transport and storage of goods or for donation purposes. The Container Systems in this category are used transport containers with a random color and BIC code. Can upon DALO’s request be upgraded with optional price list items.
Delivery time: Short. For immediate transportation demands and fast deployment.
Category 2 – Standard Transport Container Systems - New. These Container Systems will be used by the Danish Defence for transport and storage of goods. The Container Systems in this section are new transport containers with a prespecified color and marked with DALO BIC code. Can upon DALO’s request be upgraded with optional price list items.
Delivery time: Short to Medium. For immediate transportation demands and fast deployment.
Category 3 - Special Transport Container Systems - New. These Container Systems will be used of the Danish Defence for transport and storage of goods that need to be lashed in a certain way and therefore requires a flexible anchoring/lashing system that is beyond what a standard transport container can accommodate. The Container Systems in this section are new transport containers modified with extra anchoring points, a prespecified color and marked with DALO BIC code. Can upon DALO’s request be upgraded with optional price list items.
Delivery time: Medium to Long.
Category 4 - Standard PREFAB Systems. These PREFAB Systems are for example used for office and administration, living, living space, storage, depot, dining rooms and infirmary facilities. The PREFAB systems will be in different types and in it must help to provide satisfactory living conditions and support operational, logistical and manage-rial activities over a longer period of time.
The PREFAB should have the similar size to an 20´ISO container with the possible of connecting more than one together. It should further be possible to assemble the PREFAB on site, meaning that it is possible to stack and transport without exceeding the height of an 20´ ISO container.
Category 5 - Special PREFAB Systems - DEMA (Danish Emergency Management Agency) will use this PREFAB for office, accommodations, kitchen, morgue, medical facility etc. DEMA is using the PREFAB primary for fast, easy and flexible solutions for operations in distressed areas around the world. The PREFAB is based on light-weight materials and assembled with simple tools, meaning that you can set it up with only a small group of people in a couple of hours and with no need of heavy lifting equipment.
Category 6 - Service, repair/maintenance of new and old containers - Existing DALO Container Fleet
This category will be used for Service, repair and maintenance of new and old containers in the fleet of Container Systems to secure that operational/functional, meets the statutory demands and are safe to use. This might include:
• Repair and maintenance services
• Man hours: Design, Documentation, Manufacturing, Service and Maintenance
• Electrical services
• Heating-system services
• Plumbing services
• Ventilation services
• CSC recertification
• Spareparts
Category 7 – New Container Systems design or Modification for Existing Container Fleet
This category will be used for complete new design, upgrade or modification of new and old containers.
• Man hours: Design, Documentation, Manufacturing, Service and Maintenance
• Components and semi-finished product
• Installation services (except software)
• Construction, engineering and inspection services
Category 8 - Accessory
This category includes all that is not system specific to the CS-PREFAB. It can be third party product that is not cover by the above 7 categories.
Examples of accessories to the CS-PREFAB are:
Furniture (incl. office furniture), furnishings, domestic appliances (excl. lighting).
Electrical components and installations
Emergency and security equipment
Surface treatment, paint and colour
Construction materials and associated items
Site preparation work
Multi-functional buildings construction work
Transport services (excl. Waste transport)
Education and training services
Ordregiver: Danish Ministry of Defence Acquisition and Logistics Organisation
CPV: 34220000 - Påhængsvogne, sættevogne og mobile containere
Type: Udbudsbekendtgørelse – det generelle direktiv, standardordningen
Formulartype: Konkurrencevilkår
Data provenance
This notice is sourced from Denmark Udbud and was originally published on March 21, 2024. Last refreshed today. BidsFactory mirrors official procurement notices and links back to the source for full legal text.
About Danish Ministry of Defence Acquisition and Logistics Organisation
Danish Ministry of Defence Acquisition and Logistics Organisation has issued 98 procurement notices on BidsFactory, including 5 currently open and 59 awarded contracts. Activity concentrates in General Supplies & Services, Security, Defense & Justice, and Transport & Logistics. All notices are published for Denmark. Notices are distributed via TED - Tenders Electronic Daily (EU) and Denmark Udbud. Most recent publication: September 18, 2026.
Frequently asked questions about this tender
Who is the contracting authority?
This notice was issued by Danish Ministry of Defence Acquisition and Logistics Organisation in Denmark. The authority is responsible for evaluating bids, awarding the contract, and managing performance.
What type of contract is this?
This is a Supplies contract in the Transport & Logistics sector. The classification helps bidders match the opportunity to their qualifications and registered scope of supply.
Where will the contract be performed?
The contract is for delivery in Denmark. Foreign bidders should review local registration, taxation, and any in-country presence requirements before submitting.
How can I submit a bid?
Visit Denmark Udbud to access the full notice, required documents, and submission instructions provided by the contracting authority.
Find tenders like this automatically
Set up alerts and filters that match your business — never miss a relevant opportunity again.