Hood dishwashers (basket-conveyor dishwashers)

Lot 1 Item 1.1: Hood dishwasher (basket-conveyor dishwasher) Table-connectable basket-conveyor machine for hygienic washing results according to DIN EN 17735. Design • Stainless steel 1.4301 • Waste water heat recovery • Built-in dosing device for detergent and rinse aid • Inlet for detergent and rinse aid via suction hoses (suction lances) • Built-in water softener to protect the machine from limescale • Built-in drain pump; connectable to drain up to 1 m above the floor • Deep-drawn tank • Filter system for removing dirt particles from the wash water (coarse and fine dirt) • Sieve insert for collecting food residue; easy cleaning without aids or tools • All-round closed hood to reduce the escape of steam and moisture load into the room. If the machine is not equipped with an all-round closed hood, this criterion is alternatively met by a machine with integrated exhaust air heat recovery. • Hood designed to be drip-proof • Theoretical washing capacity of 60 baskets per hour (equivalent to 60 seconds per wash cycle) • For baskets of dimensions 500 mm x 500 mm • Height-adjustable feet • Hood can be opened and closed with one hand • Touchscreen • Easy-to-read control panel • Washing temperature at least 60°C • Rinse temperature at least 85°C • Basket equipment: one universal basket, one plate basket, and one cutlery basket each. Functions • Short program 60 seconds • Intensive program for stubborn dirt • Descaling and self-cleaning program with manual control • Error messages acoustic and optical Technical data • Connection values: 400 V three-phase 3N, 50 Hertz, fuse 3 x 16 A • Heating power, pressure-independent, at least 6 KW Requirements for the offered devices • Lifespan at least 10 years • Spare parts availability for at least 10 years after production discontinuation • Noise level during operation maximum 68 dB(A) Operating manual: Consumer information/user information includes • Safety instructions • Cleaning and care instructions • Troubleshooting Item 1.2 Optional equipment for Item 1.1 - integrated function to prevent steam escape when opening the machine • Additional equipment for Item 1.1 with an integrated function to prevent steam escape when opening the machine (e.g., through exhaust air heat recovery) Item 1.3 - Wall connection plate for Item 1.1 • Stainless steel 1.4301 • Fits the dishwasher from Item 1.1 for corner installation Item 1.4 - Drain table 700 mm for Item 1.1 • Stainless steel 1.4301 • For attachment to the dishwasher from Item 1.1. Attachment can be made to the left and right of the unit and is suitable for straight and corner installations. • Working height 900 mm • Wall connection plate as splash guard, at least 350 mm high over the entire table length (suitable for items 1.1 and 1.2) • 3-sided basket guide profile • Integrated slope towards the dishwasher • Frame with height-adjustable plastic screw feet • Open underframe with integrated shelf • Ground clearance approx. 150 mm • Without sink • Width 700 mm Item 1.5 - Drain table 1200 mm for Item 1.1 • Design as Item 1.4, but width 1200 mm Item 1.6 - Drain table 1700 mm for Item 1.1 • Design as Item 1.4, but width 1700 mm Item 1.7 - Inlet table 700 mm for Item 1.1 • Stainless steel 1.4301 • For attachment to the dishwasher from Item 1.1. Attachment can be made to the left and right of the unit and is suitable for straight and corner installations. • Working height 900 mm • Wall connection plate as splash guard, at least 350 mm high over the entire table length (suitable for items 1.1 and 1.2) • 3-sided basket guide profile • Integrated slope towards the dishwasher • Frame with height-adjustable plastic screw feet • Open underframe with integrated shelf • Ground clearance approx. 150 mm • Seamlessly welded sink in size 500 x 4...