Waste collection vehicle with hot water washing equipment

Auto-translated from hu

Original title: hulladékgyűjtő forróvizes edénymosó berendezéssel

Szegedi Hulladékgazdálkodási Nonprofit Kft.

Published: Mar 13, 2025

Updated: Aug 9, 2026

Source: TED - Tenders Electronic Daily (EU)

This tender has been awarded

Awarded to ITE Bus & Truck Kereskedelmi Korlátolt Felelősségű Társaság — €672,000

Browse open Transport & Logistics tenders in Hungary

About This Opportunity

Translated

This tender concerns the procurement of a refuse collection vehicle, specifically a rear-loading, rotating compaction, three-axle vehicle designed for emptying containers ranging from 60 to 1100 liters. A key feature of this vehicle is its integrated hot water washing equipment for refuse bins. The vehicle must be a three-axle unit with a 6x2 drive configuration, a minimum permissible gross vehicle weight of 26,000 kg, and a minimum payload capacity of 8,000 kg. Its dimensions are specified with a maximum height of 3,600 mm and a maximum overall length of 9,600 mm. The engine must meet at least EURO VI emission standards, be a diesel engine running on gas oil, and have a displacement between 9,000 and 10,000 cm³, with a minimum power output of 240 kW. The transmission is required to be an automated mechanical gearbox with at least 12 forward and 2 reverse gears. The cabin specified is a short, day cabin, equipped with factory-integrated camera mirrors, including wide-angle external mirrors and a ramp and blind-spot monitoring function. The refuse collection body features a heavy-duty "U" shaped sub-frame with specific profile dimensions and material thickness. The stainless steel refuse collection tank is cylindrical, wear-resistant, made of steel plate, and equipped with a dual-screw internal conveyor. The wear plates are replaceable and attached to the screw via bolted connections. The rotating drum diameter must be at least 2,200 mm, and the unit must be rear-loading. Hydraulic drum drive with necessary gearboxes is required, with the power take-off engageable from the driver's cabin or a rear control panel. The hydraulic oil tank is to be located at the front of the superstructure, above the cabin.

This is a supplies contract in the transport and logistics, environment and climate and general supplies sectors, with a focus on Fleet Management, Waste Management and Vehicles. Located in Hungary, Europe, this opportunity is open to firms and consortiums, with an estimated budget of EUR 369,873.

Published through TED - Tenders Electronic Daily (EU), a national government procurement portal. Public procurement tenders follow the country's national bidding regulations and may have specific eligibility and documentation requirements for the supply of goods in the transport and logistics sector. Supply contracts typically require bidders to demonstrate product compliance with technical specifications, delivery capacity, and relevant certifications. This contract has already been awarded. The information is published for transparency and market intelligence purposes.

Description

Auto-translated from hu

Purchase agreement for "Purchase of a new waste collection vehicle in 2 parts" PART 1: "Rear-loading, compaction, three-axle waste collection and transport vehicle, equipped with a emptying device suitable for emptying containers from 60 to 1100 liters, with hot water waste container washing equipment" 1 piece 1. The vehicle construction is 3-axle, with a 6*2-4 drive configuration 2. Permissible total weight min. 26,000 kg 3. Vehicle payload capacity min. 8,000 kg 4. Vehicle height (top of superstructure) max. 3,600 mm 5. Vehicle total length max. 9,600 mm Engine 6. Environmental classification min. EURO VI 7. Engine operating mode Diesel system 8. Fuel Diesel 9. Engine displacement min. 9,000 max. 10,000 cm3 10. Engine power min. 240 kW Gearbox 11. Automated mechanical torque converter with min. 12 forward and min. 2 reverse gears. Cabin 12. Short, day cabin 13. Factory-designed camera mirror with wide-angle external rearview mirrors on both sides 14. Factory-designed camera mirror with ramp and blind spot monitoring function Waste collection tank superstructure 15. Heavy-duty, "U"-shaped subframe. Min. 160mm section height and 70mm width. Min. 8mm material thickness. 16. Stainless steel waste collection tank with cylindrical design, wear-resistant, made of sheet steel and equipped with a double-threaded internal conveyor screw 17. Wear-resistant sheet steel material thickness. Min. 4mm 18. The upper cone plate of the compaction screw, together with the reinforcement, is made in one piece 19. The wear plates are replaceable, and their attachment to the screw is done by bolted connection 20. Rotary drum diameter Min. 2,200 mm 21. Rear-loading design 22. Hydraulic drum drive with the necessary gearboxes, after engaging the auxiliary drive, it should be possible to start it in the pre-set direction of rotation from the driver's cabin or from the control panel located at the rear of the machine 23. Hydraulic oil tank located at the front of the superstructure (behind the cabin), placed at the top to ensure continuous oil supply to the superstructure by gravity flow. 24. Collector tank useful (net) volume min. 17 m3 25. The superstructure shall be equipped with an automatic, but programmable central lubrication system, which ensures the lubrication of the necessary rotating and wearing parts of the superstructure (front and rear drum bearings, drum drive) 26. The rear drum bearing housing is made in one piece and includes the cover attachment, opening cylinders, and rear cover locking. 27. Compaction ratio for household waste Min. 1:5 28. The entire water system (water tanks, pumps) shall be designed as a unit between the cabin and the superstructure. 29. The entire water system shall be covered with a flat, sealed aluminum casing. 30. Service door design, through which the maintenance of the water system can be performed.

31. The fresh water tank shall be made of stainless steel, capacity: min. 1,500 liters 32. A Storz "C" filling connector shall be installed for filling the tank.

33. The tank filling level shall be indicated by a sight glass or a saturation sensor.

34. The wastewater tank (one or more) shall be made of stainless steel, with a total capacity of: min. 900 liters 35. The wastewater tank(s) shall be equipped with a water level indicator 36. Minimum 2.5" ball valves shall be used for wastewater discharge.

37. A cleaning opening shall be placed on the wastewater tank of such a size that manual cleaning of the tank is possible.

38. Wastewater transport shall be carried out without a pump, using air pressure (without wear and clogging).

39. The cleaning of the filter built into the wastewater line shall be carried out using backwash nozzles built into the filter body.

40. The wastewater tank(s) shall be cleaned automatically using tank cleaning nozzles.41. Maximum power of the water heating system min. 25kW Emptying device 42. According to standard MSZ EN 1501-5:2021, it is suitable for emptying containers of 60, 80, 120, 240, 770 and 1100 l according to MSZ EN 840-1,-2,-3 standards, as well as according to DIN 6629 standard...

Data provenance

This notice is sourced from TED - Tenders Electronic Daily (EU) and was originally published on March 13, 2025. Last refreshed 34 days ago. Original language: hu. BidsFactory mirrors official procurement notices and links back to the source for full legal text.

About Szegedi Hulladékgazdálkodási Nonprofit Kft.

Szegedi Hulladékgazdálkodási Nonprofit Kft. has issued 11 procurement notices on BidsFactory, including 0 currently open and 2 awarded contracts. Activity concentrates in Transport & Logistics, General Supplies & Services, and Environment & Climate. All notices are published for Hungary. Notices are distributed via Hungary EKR and TED - Tenders Electronic Daily (EU). Most recent publication: August 10, 2026.

Frequently asked questions about this tender

Who is the contracting authority?

This notice was issued by Szegedi Hulladékgazdálkodási Nonprofit Kft. in Hungary. The authority is responsible for evaluating bids, awarding the contract, and managing performance.

What type of contract is this?

This is a Supplies contract in the Transport & Logistics sector. The classification helps bidders match the opportunity to their qualifications and registered scope of supply.

How much was the contract awarded for?

ITE Bus & Truck Kereskedelmi Korlátolt Felelősségű Társaság was awarded the contract for €672,000. The figure reflects the value disclosed by the contracting authority in the award notice.

Where will the contract be performed?

The contract is for delivery in Hungary. Foreign bidders should review local registration, taxation, and any in-country presence requirements before submitting.

How can I submit a bid?

Visit TED - Tenders Electronic Daily (EU) to access the full notice, required documents, and submission instructions provided by the contracting authority.

Is this tender still open?

No — the contract has already been awarded to ITE Bus & Truck Kereskedelmi Korlátolt Felelősségű Társaság. The award notice is archived on BidsFactory for transparency and market intelligence.