Tenders/Metal CMP and brush cleaner
Awarded🇫🇮FinlandSupplies

Metal CMP and brush cleaner

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
Published: Nov 11, 2026
Updated: Nov 11, 2026
Source: Hilma Finland

About This Opportunity

This is a supplies contract in the general supplies, information and communication technology and trade and industry sectors, with a focus on Chemicals and Cleaning. Located in Finland, Europe, this opportunity is open to firms and consortiums.

Published through Hilma Finland, a national government procurement portal. Public procurement tenders follow the country's national bidding regulations and may have specific eligibility and documentation requirements for the supply of goods in the general supplies sector. Supply contracts typically require bidders to demonstrate product compliance with technical specifications, delivery capacity, and relevant certifications. This contract has already been awarded. The information is published for transparency and market intelligence purposes.

Description

Metal CMP and brush cleaner THE OBJECT OF THE PROCUREMENT The procurement concerned the delivery of an automatic metal Chemical Mechanical Polishing (CMP) system with an integrated wafer cleaner for processing and planarization of 200 mm semiconductor wafers. The scope included the fully configured CMP tool, integrated cleaning unit, required accessories, and delivery, installation, and commissioning. Tool was acquired for processing of following applications: 1. Copper and barrier polishing steps for a. Integrated passive components b. CMOS wafers Back-End-of-the-Line (BEOL) and Mid-End-of-the-Line (MEOL) c. Hybrid bonding d. Above structures may include also low K materials which need special cleaning methods 2. Through-silicon via (TSV) a. overburden metallization removal b. Silicon, silicon dioxide and silicon nitride polishing during the TSV back side processing 3. Quantum computing related materials polishing Tool to be acquired needed to be able to deliver industrial level quality & repeatability while allowing flexibility in research and technology organisation environment: polishing is done on both wafers that meet SEMI standards and wafers and wafer stacks with non-standard thicknesses, non-beveled edges with large edge exclusions & fragile edges. Single tool was acquired to serve several polishing processes that include copper, insulators and quantum related materials; several polishing platens for several consumable sets were needed. The polishing tool configuration is based on the above constraints. The equipment includes 3 polishing platens each with integrated in-situ capable pad conditioning systems, several end-point detection systems on each platen, multi-zone membrane carrier heads, slurry feed inputs for at least 4 slurries and DIW per platen and platen temperature control or cooling. The system needs to be equipped with an integrated wafer cleaner with capability to vapour drying for low k materials. Wafers are handled through SEMI Standard Mechanical Interface (SMIF) in a Dry-In Dry-Out (DIDO) fashion for at least SEMI standard 200mm wafers 725um thick. Additionally non-standard and fragile wafer material needs the option for a Dry-In Wet-Out (DIWO) approach omitting cleaning. DIRECT AWARD, Article 40 2(2) of Finnish Procurement act (1397/2016) The procurement was carried out as a direct award in accordance with 40 article Section 2(2) of the Finnish Public Procurement Act. According to the 40 § section 2(2) of the Act on Public Contracts (1397/2016), only a certain supplier can implement the procurement for a technical reason, or for a reason related to protecting an exclusive right; it shall be a further condition that there are no reasonable alternatives or substitute solutions, and that the absence of competition is not due to an artificial narrowing of the terms and conditions of the procurement. A comprehensive market survey was conducted between 2024 and 2026 to identify the suppliers capable of delivering equipment that fulfils the technical requirements as specified above. Based on the market survey only one supplier is capable of delivering a system that complies with all the mandatory technical requirements simultaneously, including three platen capability, advanced membrane carrier technology with 4+ zones, endpoint technologies with the possibility to combine optical and eddy current on single platen, required wafer handling modes (both wet-out and dry-out options), vapour drying, and integrated process control features (closed loop polishing profile adjustment). Other evaluated systems failed to meet one or more critical criteria and therefore could not provide a technically equivalent or substitutable solution. The only possible tool supplier capable of delivering within the scope and technical requirements required by VTT is Applied Materials. No reasonable alternative or substitute solutions exist, and the absence of competition is not the result of an artificial restriction of the procurement conditions. The contracting authority concludes that the procurement can be carried out only by a single supplier for technical reasons, and that the conditions for a direct award pursuant to Section 40, subsection 2, point 2 of the Finnish Procurement Act are fulfilled., Lot 1: Metal CMP and brush cleaner THE OBJECT OF THE PROCUREMENT The procurement concerned the delivery of an automatic metal Chemical Mechanical Polishing (CMP) system with an integrated wafer cleaner for processing and planarization of 200 mm semiconductor wafers. The scope included the fully configured CMP tool, integrated cleaning unit, required accessories, and delivery, installation, and commissioning. Tool was acquired for processing of following applications: 1. Copper and barrier polishing steps for a. Integrated passive components b. CMOS wafers Back-End-of-the-Line (BEOL) and Mid-End-of-the-Line (MEOL) c. Hybrid bonding d. Above structures may include also low K materials which need special cleaning methods 2. Through-silicon via (TSV) a. overburden metallization removal b. Silicon, silicon dioxide and silicon nitride polishing during the TSV back side processing 3. Quantum computing related materials polishing Tool to be acquired needed to be able to deliver industrial level quality & repeatability while allowing flexibility in research and technology organisation environment: polishing is done on both wafers that meet SEMI standards and wafers and wafer stacks with non-standard thicknesses, non-beveled edges with large edge exclusions & fragile edges. Single tool was acquired to serve several polishing processes that include copper, insulators and quantum related materials; several polishing platens for several consumable sets were needed. The polishing tool configuration is based on the above constraints. The equipment includes 3 polishing platens each with integrated in-situ capable pad conditioning systems, several end-point detection systems on each platen, multi-zone membrane carrier heads, slurry feed inputs for at least 4 slurries and DIW per platen and platen temperature control or cooling. The system needs to be equipped with an integrated wafer cleaner with capability to vapour drying for low k materials. Wafers are handled through SEMI Standard Mechanical Interface (SMIF) in a Dry-In Dry-Out (DIDO) fashion for at least SEMI standard 200mm wafers 725um thick. Additionally non-standard and fragile wafer material needs the option for a Dry-In Wet-Out (DIWO) approach omitting cleaning. DIRECT AWARD, Article 40 2(2) of Finnish Procurement act (1397/2016) The procurement was carried out as a direct award in accordance with 40 article Section 2(2) of the Finnish Public Procurement Act. According to the 40 § section 2(2) of the Act on Public Contracts (1397/2016), only a certain supplier can implement the procurement for a technical reason, or for a reason related to protecting an exclusive right; it shall be a further condition that there are no reasonable alternatives or substitute solutions, and that the absence of competition is not due to an artificial narrowing of the terms and conditions of the procurement. A comprehensive market survey was conducted between 2024 and 2026 to identify the suppliers capable of delivering equipment that fulfils the technical requirements as specified above. Based on the market survey only one supplier is capable of delivering a system that complies with all the mandatory technical requirements simultaneously, including three platen capability, advanced membrane carrier technology with 4+ zones, endpoint technologies with the possibility to combine optical and eddy current on single platen, required wafer handling modes (both wet-out and dry-out options), vapour drying, and integrated process control features (closed loop polishing profile adjustment). Other evaluated systems failed to meet one or more critical criteria and therefore could not provide a technically equivalent or substitutable solution. The only possible tool supplier capable of delivering within the scope and technical requirements required by VTT is Applied Materials. No reasonable alternative or substitute solutions exist, and the absence of competition is not the result of an artificial restriction of the procurement conditions. The contracting authority concludes that the procurement can be carried out only by a single supplier for technical reasons, and that the conditions for a direct award pursuant to Section 40, subsection 2, point 2 of the Finnish Procurement Act are fulfilled. CPV: 38000000 Organisation: TEKNOLOGIAN TUTKIMUSKESKUS VTT OY Procedure: neg-wo-call

Data provenance

This notice is sourced from Hilma Finland and was originally published on November 11, 2026. Last refreshed 7 days ago. BidsFactory mirrors official procurement notices and links back to the source for full legal text.

About TEKNOLOGIAN TUTKIMUSKESKUS VTT OY

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY has issued 117 procurement notices on BidsFactory, including 18 currently open and 50 awarded contracts. Activity concentrates in Research & Innovation, General Supplies & Services, and Information & Communication Technology. All notices are published for Finland. Notices are distributed via Hilma Finland and TED - Tenders Electronic Daily (EU). Most recent publication: November 11, 2026.

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY: buyer profile, tenders and awards

Frequently asked questions about this tender

What type of contract is this?

This is a Supplies contract in the General Supplies & Services sector. The classification helps bidders match the opportunity to their qualifications and registered scope of supply.

Where will the contract be performed?

The contract is for delivery in Finland. Foreign bidders should review local registration, taxation, and any in-country presence requirements before submitting.

How can I submit a bid?

Visit Hilma Finland to access the full notice, required documents, and submission instructions provided by the contracting authority.

Is this tender still open?

No — the contract has already been awarded to Applied Materials South East Asia Pte Ltd (3501933-4). The award notice is archived on BidsFactory for transparency and market intelligence.

Who is the contracting authority?

This notice was issued by TEKNOLOGIAN TUTKIMUSKESKUS VTT OY in Finland. The authority is responsible for evaluating bids, awarding the contract, and managing performance.

Find tenders like this automatically

Premium shows the full details of every tender like this one and alerts you instantly when a new one is published.

See plans

Key Details

Submission Deadline
May 11, 2027
174 days remaining
Contract Type
Supplies
Eligibility
Firms / Consortiums
Language
English

Source

hilma_fi
Hilma Finland
Public Procurement

Contracting Authority

TEKNOLOGIAN TUTKIMUSKESKUS VTT OY
🇫🇮Finland