Tenders/Procurement of It infrastructure for strengthening DHIS 2 Implementation and data ware house
OpenSupplies

Procurement of It infrastructure for strengthening DHIS 2 Implementation and data ware house

About This Opportunity

Invitation for Bids | Project: Health Emergency Preparedness, Response and Resilience Program Using the Multiphase Programmatic App | Method: Request for Proposals | Ref: ET-MOH-480615-GO-RFB

This is a supplies contract in the information and communication technology and architecture and engineering sectors, with a focus on Scholarships. Located in Eastern and Southern Africa, Asia, this opportunity is open to firms and consortiums.

Published through WB - World Bank, a multilateral development bank that follows standardized international procurement guidelines. Projects funded by multilateral institutions are generally open to international bidders from eligible member countries for the supply of goods in the information and communication technology sector. Supply contracts typically require bidders to demonstrate product compliance with technical specifications, delivery capacity, and relevant certifications. Interested parties should review the full documentation on the original source before submitting their proposal.

Description

**Project:** Health Emergency Preparedness, Response and Resilience Program Using the Multiphase Programmatic App

Specific Procurement Notice – Request for Proposals without Prequalification

 

Request for Proposal

Information Systems

(Design, Supply and Installation)

(Without Prequalification)

 

Purchaser: Federal Ministry of Health

Project: AFE Health Emergency Preparedness, Response, And Resilience MPA Project

Contract title: Procurement of IT infrastructure for strengthening DHIS 2 Implementation and data warehouse

Country: Ethiopia

Loan No. /Credit No. / Grant No.: E229-ET

RFP No: ET-MOH-480615-GO-RFB

Issued on: November 16, 2026

 

The Federal Democratic Republic of Ethiopia has received financing from the World Bank toward the cost of the Ethiopia Health Emergency Preparedness, Response & resilience program MPA, and intends to apply part of the proceeds toward payments under the contract for Procurement of IT infrastructure for strengthening DHIS 2 Implementation g(Supply, installation, Testing, commissioning of information system, including technical support & Training service)

The Federal Ministry of Health, Ethiopia now invites sealed Proposals from eligible Proposers for the Procurement of   ITS infrastructure for strengthening DHIS 2 Implementation and data warehouse.

 

 

 

 

S/N

Items (Category)

Description (measurable)

Unit

Quantity

Note / Remark (Acceptance criteria & measurables)

GENERAL REQUIREMENTS

1

General technical requirements

English UI/docs; UTF-8 support; operate on Ethiopian power (220–240V single / 380–415V three-phase, 50Hz); firmware/software latest stable at install

set

1

Acceptance: Verify UTF-8 display, sample English strings; power compatibility test; firmware/software version list; docs in English. Warranty: 3 yrs on-site. MAF if bidder ≠ OEM.

2

Environmental & Safety

Operate at 18–27°C, 40–60% RH non-condensing; ISO 14644-1 Class 8 air quality; noise ≤70 dBA aggregated

set

1

Acceptance: Environmental log (48-hr) within range; noise reading in aisle ≤70 dBA. EMC certificates (CE/FCC/EN) required.

STORAGE — SCALE-OUT / BACKUP

3

NVMe SAN (performance tier)

Usable NVMe SAN capacity150 TiB, SAN protocol, RDMA capable

TiB

150

Acceptance: Usable capacity verified; SAN connectivity test; RDMA handshake test; performance baseline (IOPS/latency) as vendor data.

4

Distributed NVMe NAS / Object / HDFS

Usable NVMe NAS/object capacity 400 TiB, support NFS/CIFS/HDFS/S3

TiB

400

Acceptance: Multi-protocol read/write tests; object multipart & versioning tests; throughput baseline.

5

HDD Tiering (capacity layer)

Usable HDD capacity 1.0 PiB, tiering with SSD cache

PiB

1

Acceptance: Tier migration test; capacity & performance after tiering; SSD cache hit ratio report.

6

Centralized backup ()

Physical capacity 200 TiB, active-active controllers, RAID-6 or equivalent

TiB

200

Acceptance: Backup speed ≥72 TB/hr system; restore ≤36 TB/hr; dedupe ratio evidence; RAID resilience test (tolerate 3 disk failure in RAID group where specified). Gartner leader vendor evidence required.

STORAGE NODE HARDWARE (minima)

7

All-flash NVMe SAN node (per node minima)

≥512 GB RAM; ≥96 CPU cores (48×2); 2×480 GB system disks; NVMe disks ~7.68 TB; 2×25GbE + 2×GE mgmt

node

as proposed

Acceptance: BOM check; boot & perf test; NIC throughput test.

8

All-flash NVMe NAS node (per node minima)

≥512 GB RAM; ≥96 cores; usable capacity guidance per vendor; 4×25GbE

node

as proposed

Acceptance: Multi-protocol access & concurrency tests.

9

HDD Tiering node (per node minima)

≥256 GB RAM (or spec), SSD cache 4×3.2 TB, ≥96 cores

node

as proposed

Acceptance: Cache eviction & rebuild tests.

COMPUTE / VIRTUALIZATION

10

Compute servers

Virtualization Computing Resource Pool: Rack servers: 2×x86 CPUs

 

CPU Cores

616

 

11

Compute servers

Virtualization Computing Resource Pool: Rack servers: 2×x86 CPUs

 

RAM

GB

5376

 

SDN / DATA-WAREHOUSE FABRIC

15

SDN Controller cluster

1-node cluster; manage ≥1.8K NVEs per 1-node cluster; OpenFlow/NETCONF southbound; REST northbound; intent orchestration, dry-run & rollback

unit

1

Acceptance: Controller cluster failover test; scale test report (1.8K NVEs); API call set; dry-run configuration and rollback validated. Third-party test reports required. MAF required.

POWER, COOLING & DISTRIBUTION

16

Aisle containment (cold containment)

Dual-row cold aisle module 7200×3600×2410 mm; double revolving doors; max IT load 235 kW

module

1

Acceptance: Physical dimensions check; containment pressure test; IT load capacity verification.

17

Server cabinets / racks

42U racks 600×1200×2000 mm; ≥75% perforation; rPDU mount; load ≥1500 kg/m²

unit

20

Acceptance: Rack assembly check; PDU mounting & earth continuity test.

18

In-row cooling units

Air in-row units, 46 kW each, horizontal flow, dual power

unit

4

Acceptance: Cooling capacity test at design load; redundancy & failover test; condensate & piping inspection. MAF required.

19

Power room AC

60 kW sensible cooling, downflow, RS485/Modbus/SNMP

unit

1

Acceptance: Power room temp/humidity control test; communications integration test. MAF required.

20

UPS systems

200 kVA (extendable to 300 kVA), 30-minute runtime at full load, hot-swappable bypass, SNMP/Modbus monitoring

unit

4

Acceptance: Runtime test at 100% load for 30 min; bypass maintenance test; battery health report. MAF required.

21

Main Distribution Board (MDB)

Prefab panel, 1000A busbars, digital metering, TCP/IP or RS485 comms

unit

2

Acceptance: Single-line drawings; functional metering test; protection/relays verification.

22

Power Distribution Frame (PDF) & PDB

PDF: 400A MCCB input, modular outputs; PDB wall-mounted 250A

PDF / PDB

PDF 2 / PDB 2

Acceptance: Overcurrent protection & SPD test; wiring inspection.

DCIM & OPERATIONS

23

DCIM system

Monitoring server (64GB RAM, SSDs), PoE switches, temp/humidity/smoke/water sensors, SMS alarm, 2×2 NOC displays, 8 workstations, browser/server software

set

1

Acceptance: Sensor calibration; SMS alarm test; PUE reporting capability; user role & report generation demo. MAF required.

PHYSICAL SECURITY

24

Dome cameras (analytics)

2MP, IP66, IR 30m, H.264/H.265, face/person detection

pcs

6

Acceptance: Video quality at 1080p; analytics accuracy sample; PoE power & DCIM integration test.

25

Bullet cameras

2MP, IP67, IR 50m, analytics

pcs

6

Acceptance: Night/IR test; analytics trigger tests.

26

NVR

64-ch 1080p, 6×8TB storage, 8GB RAM, integrate with DCIM

unit

1

Acceptance: Channel load test (320 Mbps), archival & search test, alarm integration.

27

Access control system

Central controller + readers (fingerprint+card+keypad), magnetic locks, emergency release; integrate with DCIM

doors

5

Acceptance: Access event logs; biometric enrollment & match rate; emergency release functional test; supply 25 IC cards.

FIRE SUPPRESSION & SAFETY

28

Fire suppression (FM200) & alarm

FM200 gas system for Main DC & Power room; conventional fire panel; detectors; gas discharge ≤10 sec

set

2

Acceptance: System commissioning test; EN54 compliance evidence; discharge timing test; manual abort & alarm tests. MAF required.

CIVIL & FIT-OUT

29

Raised floor (anti-static)

Anti-static tiles 600×600 mm, pedestal height 300–400 mm, load >400 kg/m²

m²

Main DC 25 + Power room 25

Acceptance: Floor flatness & load test; ESD resistance test.

30

Fire-rated walls & doors

Fire-rated cladding & doors; doors Type1 (1500×2400mm) & Type2 (900×2400mm) ≥1.5 hr rating

lot

as per design

Acceptance: Fire rating certificates; door operation & seals test.

31

Lighting & electrical fittings

LED 600×600 lamps, ≥500 lux with motion sensors, emergency LEDs 20-minute backup

set

as per rooms

Acceptance: Lux measurement; motion sensor response; emergency light test.

CABLES, ACCESSORIES & FURNITURE

32

Cabling & transceivers

Power & network cabling sized by bidder; FC & SFP modules; patch panels; accessories

lot

1

Acceptance: Cable test reports (OTDR/continuity); all transceivers present and tested.

33

Furniture (NOC/SOC)

NOC/SOC desks (metal + MDF), 24/7 high-back chairs, floor mats

set

Desks 8; Chairs 16

Acceptance: Ergonomics check; delivery & installation.

Cloud Planform requirement

34

Cloud Management

Cloud Management Platform to cover all the resources pools for computing, bare metal, storage and networks listed in platform sizing

set

1

License & SNS

35

Backup function

Inside Cloud Backup

set

1

License & SNS

36

Authentication

Cloud Security-Identity and Authentication

set

1

License & SNS

37

Security protection

Cloud Security-Security Group

set

1

License & SNS

38

Network ACL

Cloud Security-Network ACL

set

1

License & SNS

39

Security protection

Cloud Security-Virtualization isolation

set

1

License & SNS

40

Cloud Hardware Management

Cloud Hardware Management Platform to cover all the hardware for computing, bare metal, storage and networks listed in platform sizing

set

1

License & SNS

41

Cloud storage

cloud distributed storage software

set

1

License & SNS

42

Cloud Suite

cloud IaaS resource pool capabilities

set

1

License & SNS

43

Security protection

Cloud Security-Cloud virtual machine protection

set

1

License & SNS

Cloud Planform network requirements

44

Spine  Switch

32 ports 100G QSFP28 interface, 8 ports 400GE QSFPDD interface; Switch Capacity ≥16Tbit/s; ≥2400  Mpps;

set

2

Devices & license

45

Leaf Switch

48 ports 10G/25GE SFP+ interface, 6 ports 100GE QSFP28 interface;

Switch Capacity ≥2Tbits/s ; ≥940 Mpps

set

16

Devices & license

46

Management switch

At least 48 ports 10/100/1000Base-T interface, 4 ports 10GE SFP+ interface;

set

2

Devices & license

47

Firewall ()

At least 10 ports 10GE SFP+ interface, 4 ports GE(RJ45) interface, 8 ports GE(Combo);

set

2

Devices & license

48

Router (Qty 2 for data center Egress)

At least 10 ports 10GE SFP+ interface, 8 ports GE Combo, 4 ports GE(RJ45) interface,

Forwarding rate min 25Gbps

set

2

Devices & license

Miscellaneous

49

Delivery Location

Ministry of Health (Addis Ababa and designated implementation sites)

Lot

1

All equipment and systems shall be delivered, installed, and commissioned at MoH-designated sites (St Paul Millennium Medical College)

50

Delivery Period

Completion of supply, installation, testing, and commissioning within 9 months from contract signing

Months

9

Delivery schedule and implementation plan to be approved by the Purchaser

       

 

 

The procurement process will be conducted through international competitive procurement using a Request for Proposal (RFP) as specified in the World Bank’s “Procurement Regulations for IPF Borrowers” (“Procurement Regulations, seventh edition issued in September 2025.”) and is open to all eligible Bidders as defined in the Procurement Regulations.

Bids will be evaluated in accordance with the evaluation process set out in the bidding documents. The following weightings shall apply for Rated Criteria (including technical and non-price factors): 60%, and for Bid cost: 40%.

4.        Interested eligible Proposers may obtain further information from Federal Ministry of Health, Procurement Executive office Mr. Gemechisa olani & gemechisa.olani@moh.gov.et and inspect the request for proposals document during office hours 8:30AM to 12:30AM Ethiopian Time and from 1:30PM to 5:30PM Ethiopian Time from Monday to Thursday and from 8:30AM to 11:30AM Ethiopian Time” and from 1:30PM to 5:30PM “Ethiopian Time”  Friday at the address given below.

5.        The RFP document in English may be purchased by interested eligible Bidders upon the submission of a written application to the address below and upon payment of a nonrefundable fee USD 100 (USD One hundred only), or equivalent in ETB or in a freely convertible currency. Please note that the payment will be deposited to the bank account; to commercial bank of Ethiopia Ministry of Health Account 1000000984877 for local bidders and Ethiopia Ministry of Health 0100081300154 (Account Name: Ministry of Health ZAALID, SWIFT Code: CBETETAA)   for international bidders. If the payment is in the form of deposit; Once the payment has been made, kindly send the prepaid receipt to the email address gemechisa.olani@moh.gov.et ,  the document will be collected by local representatives from the address given below or send through email,

6.        Proposals must be delivered to the address below on or before December 29   2026 @ 2:00 PM Ethiopian Time. Electronic procurement will not be permitted. Late Proposals will be rejected. The outer Proposal envelopes marked “ORIGINAL PROPOSAL”, and the inner envelopes marked “TECHNICAL PART” will be publicly opened in the presence of the Proposers’ designated representatives and anyone who chooses to attend, at the address below on 29 December 2026 @ 2:00 PM Ethiopian Time. All envelopes marked “FINANCIAL PART” shall remain unopened and will be held in safe custody of the Purchaser until the second public Proposals opening.

7.        All Proposals must be accompanied by a “Proposal Security” of USD 100,000 (USD One hundred thousand) or its equivalent amount in freely convertible currencies. The source of exchange rate will be national Bank of Ethiopian on the proposal submission date.

8.        Attention is drawn to the Procurement Regulations requiring the Borrower to disclose information on the successful Proposer’s beneficial ownership, as part of the Contract Award Notice, using the Beneficial Ownership Disclosure Form as included in the request for proposal document.

9.        The address (es) referred to above is (are):

         Ministry of Health,

Procurement Executive Office

Street Address: Goma Kuteba, Sudan Street, Addis Ababa, Ethiopia

Floor/Room number: 1st Block, 2nd Floor/Room number 201

Email: moh@ethionet.et, Web site: www.moh.gov.et

Procurement Specialist, Mr. Gemechisa Olani (gemechisa.olani@moh.gov.et)

 

Data provenance

This notice is sourced from WB - World Bank and was originally published on November 12, 2026. Last refreshed today. Reference: OP00481028. BidsFactory mirrors official procurement notices and links back to the source for full legal text.

About Health Emergency Preparedness, Response and Resilience Program Using the Multiphase Programmatic App

Health Emergency Preparedness, Response and Resilience Program Using the Multiphase Programmatic App has issued 85 procurement notices on BidsFactory, including 3 currently open and 47 awarded contracts. Activity concentrates in Health & Medical, General Supplies & Services, and Information & Communication Technology. Notices are distributed via WB - World Bank. Most recent publication: November 12, 2026.

Frequently asked questions about this tender

How can I submit a bid?

Visit WB - World Bank to access the full notice, required documents, and submission instructions. Quote reference OP00481028 when communicating with the contracting authority.

Who is the contracting authority?

This notice was issued by Health Emergency Preparedness, Response and Resilience Program Using the Multiphase Programmatic App in Eastern and Southern Africa. The authority is responsible for evaluating bids, awarding the contract, and managing performance.

What type of contract is this?

This is a Supplies contract in the Information & Communication Technology sector. The classification helps bidders match the opportunity to their qualifications and registered scope of supply.

Where will the contract be performed?

The contract is for delivery in Eastern and Southern Africa. Foreign bidders should review local registration, taxation, and any in-country presence requirements before submitting.

Find tenders like this automatically

Premium shows the full details of every tender like this one and alerts you instantly when a new one is published.

See plans

Key Details

Location
🌍Eastern and Southern Africa
Asia
Contract Type
Supplies
Eligibility
Firms / Consortiums
Language
English
Reference
OP00481028

Source

w
WB - World Bank
Multilateral

Contracting Authority