Project Implementation Consultant (PIC) for the Technical Validation, Detailed Architectural and Engineering Design, and Construction Supervision of Mindanao Schools - PIC 3
This tender is closed
The submission deadline for this tender has passed. It is no longer accepting bids.
About This Opportunity
Request for Expression of Interest | Project: Infrastructure for Safer and Resilient Schools | Method: Quality And Cost-Based Selection | Ref: PH-DPWH-CS-PIC3-RFP
This is a consulting contract in the architecture and engineering and construction and civil works sectors. Located in Philippines, Asia, this opportunity is open to firms and consortiums.
Published through WB - World Bank, a multilateral development bank that follows standardized international procurement guidelines. Projects funded by multilateral institutions are generally open to international bidders from eligible member countries for consulting in the architecture and engineering sector. Consulting assignments are typically evaluated with a strong emphasis on the technical proposal, including the methodology and qualifications of key experts. Shortlisted firms may be invited to submit financial proposals in a second stage.
Description
REQUEST FOR EXPRESSIONS OF INTEREST
Consulting Services for the Project Implementation Consultant (PIC) for the Technical Validation, Detailed Architectural and Engineering Design, and Construction Supervision of Mindanao Schools – PIC 3 under IBRD Loan No. 97040-PH: Infrastructure for Safer and Resilient Schools (ISRS) Project
Country: Philippines
Name of Project: Infrastructure for Safer and Resilient Schools (ISRS) Project
Loan No.: IBRD Loan No. 97040-PH
Assignment Title: Contract ID No. 26CSZ007, Consulting Services for the Project Implementation Consultant (PIC) for the Technical Validation, Detailed Architectural and Engineering Design, and Construction Supervision of Mindanao Schools – PIC 3 under IBRD Loan No. 97040-PH: Infrastructure for Safer and Resilient Schools (ISRS) Project
Reference No.: PH-DPWH-CS-PIC3-RFP
1. The Republic of the Philippines (hereinafter called ”Borrower”) has received financing from the World Bank (the “Bank”) toward the cost of the Infrastructure for Safer and Resilient Schools (ISRS) Project, and intends to apply part of the proceeds for consulting services for the Project Implementation of the ISRS project.
2. The consulting services (“the Services”) being procured via this REOI includes the following summary of the key responsibilities expected under these Services:
The consulting services are structured into two key phases: the Detailed Architectural and Engineering Design (DAED) Phase and the Construction Supervision (CS) Phase. These phases collectively cover the progression of the project from the development of complete, buildable design solutions to the actual implementation and delivery of the works. A. The Detailed Architectural and Engineering Design (DAED) Phase covers the full development of technical solutions for the project, starting from validation of site conditions up to the preparation of complete, procurement-ready design documents. This phase ensures that all interventions are technically sound, climate-resilient, and compliant with environmental and social safeguards, ultimately enabling smooth transition to procurement and construction. A.1 Inception and Planning A.2 Technical Validation and Assessment Outputs A.3 Environmental and Social Safeguards Deliverables A.4 Detailed Architectural and Engineering Design (DAED) A.5 Procurement Support and Bidding Documents A.6 Progress Monitoring and Reporting B. The Construction Supervision (CS) Phase focuses on ensuring that the approved designs are implemented correctly, efficiently, and in compliance with all technical, environmental, and contractual requirements. During this phase, the Consultant acts as the Client’s representative in overseeing construction, maintaining quality control, and ensuring that the completed works meet the intended standards prior to turnover. B.1 Pre-Construction Supervision B.2 Construction Monitoring and Supervision Reports B.3 Environmental, Social, Health, and Safety (ESHS) Compliance Monitoring B.4 Quality Control and Technical Support Outputs B.5 Completion, Acceptance, and Turnover Deliverables B.6 Defects Liability and Close-Out Reports |
The detailed Terms of Reference (TOR) can be access through this link: https://drive.google.com/drive/folders/19csDthvYbQsTt-LV5lEyMn7j56wcvhlh
The type of Contract will be Lump-sum and Time-based and the Contract Duration will be 36 months.
3. The Department of Public Works and Highways (DPWH) now invites eligible consulting firms (“Consultants”) to indicate their interest in providing the Services. Interested Consultants should provide information demonstrating that they have the required qualifications and relevant experience to perform the Services. The shortlisting criteria are summarized below:
The assignment will be undertaken by a firm consultant with established expertise and reputation in the fields of Detailed Architectural & Engineering Design and Construction Supervision for the Retrofitting or Construction of Buildings, and preparation and implementation of the ESMF instruments. A. Factors to consider for the required qualification of the Firm consultant are as follows A.1 CONSULTANCY SERVICES EXPERIENCE Must have completed minimum of two (2) similar consultancy service contracts within the last fifteen (15) years (from January 2011 up to the EOI submission deadline) involving ONLY Detailed Architectural and Engineering Design (DAED) AND Construction Supervision (CS) for Retrofitting/Construction of Buildings projects, or two (2) each of the above scopes. In cases where only one (1) similar consultancy service contract is completed/provided, the Firm may submit two (2) Other Related Consultancy Services contracts completed within the same 15-year period, involving ONLY Detailed Architectural and Engineering Design (DAED) AND Construction Supervision (CS) of ANY infrastructure projects, or two (2) each, which shall be accepted in lieu of the remaining required similar consultancy service contract. For ease of reference and understanding, the Consultancy Services Experience requirement may be satisfied through any of the cases enumerated in the table below.
For Joint Ventures (JV), the JV, as a whole, must collectively satisfy the Consultancy Services Experience requirement. A.2 MANAGERIAL AND ORGANIZATIONAL CAPABILITIES: The Firm should have been in business for at least the last ten (10) years. In case of Joint Venture, this requirement is applicable to each JV Member. |
Key Experts will not be evaluated at the shortlisting stage.
4. Please refer to ANNEX A for the guidance on the contents of EOI.
5. Interested Consultants is drawn to Section III, paragraphs, 3.14, 3.16, and 3.17 of the World Bank’s Procurement Regulations for IPF Borrowers, dated September 2023 (“Procurement Regulations”), setting forth the World Bank’s policy on conflict of interest.
6. Consultants may associate with other firms to enhance their qualifications, but should indicate clearly whether the association is in the form of a joint venture and/or a sub-consultancy. In the case of a joint venture, all the partners in the joint venture shall be jointly and severally liable for the entire contract, if selected.
7. A Consultant will be selected in accordance with the Quality Cost Based Selection method (QCBS) set out in the Procurement Regulations.
8. Further information can be obtained at the address below during office hours, i.e. 07:00AM to 04:00PM (Philippine Time).
SOLEDAD R. FLORENCIO Project Director, Buildings and Special Projects Management Cluster (BSPMC), Unified Project Management Office (UPMO) 2nd Street, Port Area, Manila Tel. No. (+632) 5304-3749 Email: florencio.soledad@dpwh.gov.ph sol_florencio@yahoo.com.ph Copy furnish: pua.jerson@dpwh.gov.ph engr.jpua14@gmail.com | OR | MA. VICTORIA S. GREGORIO Director, Procurement Service DPWH Central Office Bonifacio Drive, Port Area, Manila Tel. No. (+632) 5304-3259 Email: gregorio.ma_victoria@dpwh.gov.ph |
9. Expressions of interest must be delivered in a written form and received to the address below (by personal delivery or courier) not later than 09 July 2026 at 09:00AM (Philippine time).
Department of Public Works and Highways Bids and Awards Committee for Consulting Services Attention: Atty. RIO T. ESPIRITU Undersecretary for Support Services 5th floor, Room 502, Bonifacio Drive, Port Area, Manila 1018 Tel. No. +632-5304-3023 / +632-5304-3266 Email: espiritu.rio@dpwh.gov.ph |
Atty. RIO T. ESPIRITU
Undersecretary for Support Services
Chairperson, Bids and Awards Committee for Consulting Services (BACCS)
S.O. No. 67, Series of 2026
Date Signed: ___________________
ANNEX A – Guidance on the contents of EOI
4.1 EOIs to be submitted in one (1) hard ORIGINAL copy, one (1) hard COPY NO. 1, and one (1) PDF electronic copy in flash drive (note: original hard copy shall prevail in the evaluation) within the stated deadline and address as specified in the main text of REOI. An EOI for this consultancy assignment must be submitted in a sealed envelope marked (outside of the envelope):
“Expression of Interest (EOI) for Contract ID No. 26CSZ007, Consulting Services for the Project Implementation Consultant (PIC) for the Technical Validation, Detailed Architectural and Engineering Design, and Construction Supervision of Mindanao Schools – PIC 3 under IBRD Loan No. 97040-PH: Infrastructure for Safer and Resilient Schools (ISRS) Project;
Submission Date: ______________ (DD/MM/YYYY);
Submitted By: ________________(Name of Firm)”
(Please specify whether ‘ORIGINAL’ or ‘COPY No. 1’)
4.2 EOIs should have a maximum of 80 pages only (excluding supporting documents). EOI format:
- Font Style: Tahoma
- Minimum Font Size: 10
- Single Line Spacing
- Paper Size: A4
- Put pagination in the lower right corner of the paper
- All pages must be signed by Authorized Representative
4.3 Each EOI needs to include the following:
4.3.1 A cover letter expressing interest in the services and briefly stating contract name and contract ID no.
4.3.2 Firm’s overall profile. Should include the following but not limited to Organizational Structure, Overall Organizational Structure, Information on Manpower with technical and professional competence necessary for successful implementation of the Assignment, and the information below:
Consultant Name | Acronym of Consultant Name | Country of Incorporation | Role [Sole Firm / Lead JV Partner/ JV Partner/ Sub-Consultant] | Contact Details of the Firm [Tel. No., Email, Fax No.] | Year of Business Establishment, Key business fields |
4.3.3 Experience of the Firm in tabular form below, applied to Similar Consultancy Services Experience and Other Related Consultancy Services Experience. List the most relevant projects with largest contract cost first. Minimum Details should include the following but not limited to:
Project Reference No. XX | |
Experience of | (Insert Name of Consulting Firm) |
Contract/Project/Assignment Title and Number | (Insert complete contract name/title/number) |
Country of Assignment/Name of project site | (Insert information) |
Contract Cost | (Insert Currency and Amount) |
Contract Cost % Share / Amount Paid to your Firm | (Insert % of share in the Consulting Services Contract or Amount Paid to your Firm. ONLY amount paid to the Firm shall be considered) |
Contract Signing Date | (DD/MMM/YYYY) |
Contract Duration | (Insert Months) |
Completion Date | (DD/MMM/YYYY) |
Client / Employer | (Insert Name, Contact Information, Full Address) |
Funding Source | (Insert information) |
Role in the Project/Assignment | (Specify whether Sole Firm / Lead JV Partner/ JV Partner/ Sub-Consultant) |
Brief Description | (Insert brief description of consultant’s role/involvement/tasks in the assignment, number of man-months, project description, output/deliverable, etc.) |
4.3.5 Supporting Documents/Appendix/Attachments (will not be part of the page limit):
- Certificate of Incorporation of the Firm
- Certificate of Incorporation of the JV member (for each member)
- Letter of Association
- Documentary evidence showing year of business establishment, business fields
- Other necessary supporting documents
---------------------------------------------------- (Nothing Follows) ----------------------------------------------------
Data provenance
This notice is sourced from WB - World Bank and was originally published on June 17, 2026. Last refreshed 129 days ago. Reference: OP00440561. BidsFactory mirrors official procurement notices and links back to the source for full legal text.
About Infrastructure for Safer and Resilient Schools
Infrastructure for Safer and Resilient Schools has issued 4 procurement notices on BidsFactory. Activity concentrates in Architecture & Engineering Services and Construction & Civil Works. All notices are published for Philippines. Notices are distributed via WB - World Bank. Most recent publication: June 17, 2026.
Frequently asked questions about this tender
How can I submit a bid?
Visit WB - World Bank to access the full notice, required documents, and submission instructions. Quote reference OP00440561 when communicating with the contracting authority.
Is this tender still accepting bids?
No — the submission deadline has passed. The notice is archived for reference. To find open opportunities, use the filters above to browse current tenders.
Who is the contracting authority?
This notice was issued by Infrastructure for Safer and Resilient Schools in Philippines. The authority is responsible for evaluating bids, awarding the contract, and managing performance.
What type of contract is this?
This is a Consulting contract in the Architecture & Engineering Services sector. The classification helps bidders match the opportunity to their qualifications and registered scope of supply.
Where will the contract be performed?
The contract is for delivery in Philippines. Foreign bidders should review local registration, taxation, and any in-country presence requirements before submitting.
Find tenders like this automatically
Premium shows the full details of every tender like this one and alerts you instantly when a new one is published.
Sectors & Categories
Key Details
Contracting Authority
Companies That Won Similar
Companies with awards in Architecture & Engineering Services in Philippines