Delivery of two forklifts – telescopic loaders with included warranty service, for loading RDF bales and recyclable materials (plastic, paper, aluminum) on the territory of OP SPTO
About This Opportunity
TranslatedThis tender concerns the procurement and delivery of two new, unused telescopic wheel loaders, complete with additional equipment and warranty service. These machines are intended for the needs of the Waste Treatment Plant (ОП СПТО) located in the "Sadinata" area, Yana village, specifically for the MTB plant which produces RDF fuel. The primary function of these loaders will be to handle bales of Refuse-Derived Fuel (RDF) and various recyclable materials, including plastics, paper, and aluminum.
Key technical specifications for the telescopic loaders include a minimum lifting capacity of 3400 kg, a maximum horizontal reach of 2000mm to 2400mm, and a diesel engine meeting Stage V or equivalent standards, with a displacement of at least 2500 cm³ and a power output of no less than 45 kW. The hydraulic pump must have a low flow rate not exceeding 30 l/min and a high flow rate not exceeding 70 l/min. The lifting height should be at least 4300mm, with a maximum machine height not exceeding 2400mm and a width not exceeding 1450mm. The loaders must feature a telescopic boom, a fork carrier rotation of at least 110°, hydraulic fork positioners, 4x4 drive, and a reinforced chassis. The cabin must be enclosed, ROPS/FOPS compliant, and equipped with a protective grille and air conditioning.
Additional equipment specified includes a hydraulic clamp with a minimum load capacity of 2000 kg, a load center of 500mm, a side shift of at least 80mm, and a load rack. The clamp should also feature a grab on its inner side.
This is a supplies contract in the general supplies, transport and logistics and environment and climate sectors, with a focus on Vehicles and Waste Management. Located in Bulgaria, Europe, this opportunity is open to firms and consortiums, with an estimated budget of BGN 400,000.
Published through TED - Tenders Electronic Daily (EU), a national government procurement portal. Public procurement tenders follow the country's national bidding regulations and may have specific eligibility and documentation requirements for the supply of goods in the general supplies sector. Supply contracts typically require bidders to demonstrate product compliance with technical specifications, delivery capacity, and relevant certifications. This contract has already been awarded. The information is published for transparency and market intelligence purposes.
Description
Auto-translated from RussianDelivery of two new, unused forklifts – telescopic loaders with additional equipment for the needs of the MTB waste processing plant producing RDF fuel, including warranty service for the delivered forklifts – village Yana, area "Sadinata" – OP SPTO", according to the Technical Specification. 1 Maximum load capacity Not less than 3400 kg. 2 Maximum horizontal reach forward (at 500mm center of gravity) From 2000 mm to 2400mm. 3 Engine Diesel, 4-cylinder, compliant with Stage V standard or equivalent 4 Engine displacement Not less than 2500 cm3. 5 Power Not less than 45 Kw. 6 Hydraulic pump flow rate (low/high) l/min At low flow rate not more than 30l, at high flow rate not more than 70l. 7 Load capacity at 2m reach - horizontal Not less than 2500 kg. 8 Machine weight Not less than 5000kg. 9 Maximum lifting height Not less than 4300mm. 10 Maximum height at lift Not less than 5100mm. 11 Loader construction Telescopic single-arm boom 12 Fork carrier rotation Not less than 110° 13 Forks Hydraulic side shift of pallet forks 14 Wheel formula 4x4 15 Chassis Reinforced 16 Cabin Closed type fully compliant with ROPS and FOPS standards, for protection against falling objects 17 Protective grille To be included to protect operational personnel 18 Air conditioning Yes 19 Wheelbase – front/rear axle Not less than 2000mm. 20 Machine height Not more than 2400mm. 21 Undercarriage protection Included 22 Drive axle protection Included 23 Maximum machine width not more than 1450mm Additional Equipment – Hydraulic clamp: 1 Load capacity Not less than 2000kg. 2 Load center 500mm. 3 Side shift Not less than 80mm. 4 Reach From 570 to 1880mm. 5 Load backrest To be included 6 Grab from the inside of the clamp Yes
Data provenance
This notice is sourced from TED - Tenders Electronic Daily (EU) and was originally published on March 19, 2025. Last refreshed 34 days ago. Original language: Russian. BidsFactory mirrors official procurement notices and links back to the source for full legal text.
About СТОЛИЧНА ОБЩИНА
СТОЛИЧНА ОБЩИНА has issued 260 procurement notices on BidsFactory, including 16 currently open and 166 awarded contracts. Activity concentrates in Architecture & Engineering Services, General Supplies & Services, and Construction & Civil Works. All notices are published for Bulgaria. Notices are distributed via TED - Tenders Electronic Daily (EU). Most recent publication: September 8, 2026.
Frequently asked questions about this tender
How much was the contract awarded for?
СИ ЕМ ЕЛ БЪЛГАРИЯ АД was awarded the contract for BGN 399,886. The figure reflects the value disclosed by the contracting authority in the award notice.
Where will the contract be performed?
The contract is for delivery in Bulgaria. Foreign bidders should review local registration, taxation, and any in-country presence requirements before submitting.
How can I submit a bid?
Visit TED - Tenders Electronic Daily (EU) to access the full notice, required documents, and submission instructions provided by the contracting authority.
Is this tender still open?
No — the contract has already been awarded to СИ ЕМ ЕЛ БЪЛГАРИЯ АД. The award notice is archived on BidsFactory for transparency and market intelligence.
Who is the contracting authority?
This notice was issued by СТОЛИЧНА ОБЩИНА in Bulgaria. The authority is responsible for evaluating bids, awarding the contract, and managing performance.
What type of contract is this?
This is a Supplies contract in the General Supplies & Services sector. The classification helps bidders match the opportunity to their qualifications and registered scope of supply.
Find tenders like this automatically
Set up alerts and filters that match your business — never miss a relevant opportunity again.