1. Lot No. 1 Specialized waste collection vehicle for food and bio-waste with a superstructure volume of 8.5 m3 - 3 units.

Specialized waste collection vehicle for food and bio-waste with a superstructure volume of 8.5 m3 Base vehicle and superstructure - Factory new, manufactured no earlier than 01.01.2025. A. BASE VEHICLE - Manufacturer........./make ..... / model ....... (to be specified in the Technical Proposal by the participant) 1. Technically permissible mass - ≤ 10,000 kg. 2. Wheel formula - 4x2; Wheelbase ≤ 3,200 mm. 3. Engine - Displacement ≤ 4500 cm3; Power ≥ 135 kW; Maximum torque ≥ 700 Nm; The engine must not be equipped with an exhaust gas recirculation system (EGR valve); The vehicle must comply with ORDINANCE No. H-21 of 19.12.2023 on the requirements for clean vehicles. 4. Environmental standard - Minimum Euro 6E or equivalent. 5. Gearbox - Manual or automatic gearbox with at least 6 forward gears and one reverse gear. 6. Braking system - Pneumatic with ABS, ASR, ESP or equivalent systems; Disc brakes on front and rear axles; Parking brake. 7. Suspension - First axle – steerable with mechanical spring suspension; axle load ≥ 2000 kg; Second axle – drive axle with parabolic, reinforced suspension. 8. Cabin - Day (short) cabin, 1+2 seats; Cabin color: white; Driver's seat with air suspension; Electric window controls; Electrically adjustable and heated mirrors; Latest generation digital tachograph; Air conditioning; 2 pcs. orange LED lights; Front fog lights; Front LED lights, with automatic activation when the engine starts; Cruise control; Radio with "hands-free" function and USB connection; Reverse alarm buzzer. 9. Steering - Left-hand drive, adjustable. 10. Equipment - 24V electrical system; Fuel tank – minimum 200 L; Spare wheel with rim; Chocks against rolling away; Basic tool kit, jack. B. SUPERSTRUCTURE Manufacturer........./make ..... / model ....... (to be specified in the Technical Proposal by the participant) Type - Waste collection superstructure with "tipper" type mechanism Main requirements for the superstructure - Waste bin volume ≥ 8.5 m3; Combined lifting and emptying device for containers, for metal and plastic bins with volumes of 120, 240 and 360 liters; Emptying of bins/containers by two consecutive movements – lifting and tilting of bins/containers to prevent waste falling/leachate spilling onto the ground during the operation; Emptying of the waste bin by lifting and tilting the superstructure; 2 pcs. rear hydraulic stabilizers for stabilizing the vehicle during the bin emptying process; Solid, fixed roof over the front loading part of the superstructure and a sliding roof with hydraulic control (opening/closing) over the rear loading part of the superstructure; Hydraulic drive via power take-off (PTO) from the vehicle's gearbox; Minimum 1 work lamp to illuminate the superstructure during night work; Rotating signal lights: front and rear; Control panel for the superstructure located at the rear of the vehicle. C. WARRANTY PERIOD Chassis warranty period: Minimum 24 (twenty-four) months or mileage of 100,000 (one hundred thousand) km. – whichever event occurs first. Superstructure warranty period – minimum 24 months. The scope of the order also includes training for at least one operator and providing warranty (service) maintenance for the delivered equipment during the warranty period. The vehicle engines must comply with the requirements of ORDINANCE No. H-21 of 19.12.2023 on the requirements for clean vehicles. The full scope of activities and minimum requirements for the technical characteristics of the trucks and superstructures are described in detail in the Technical Specification, an appendix to the participation documentation. The scope of the order also includes training for at least one operator and providing warranty (service) maintenance for the delivered equipment...