Supply and deliver fuel to UNSMIL HQ, OEA, Janzour ,Tripoli, Libya
This tender has expired
The submission deadline for this tender has passed. It is no longer accepting bids.
About This Opportunity
UN Secretariat - Request for EOI
This is a services contract in the architecture and engineering, legal services, security and defense, mining and extractives and health and medical services sectors. Located in Libya, Africa, this opportunity is open to firms and consortiums. Proposals must be submitted before June 21, 2026.
Published through UNGM - United Nations Global Marketplace, part of the United Nations system, which follows UN procurement standards. UN-funded opportunities are typically open to vendors registered in the UN Global Marketplace for services in the architecture and engineering sector. Service contracts are typically evaluated on both technical quality and price, and may require bidders to demonstrate relevant experience and qualified personnel. Interested parties should review the full documentation on the original source before submitting their proposal.
Description
Agency: UN Secretariat | Reference: EOIUNSMIL24470 | Type: Request for EOI
The United Nations seeks to establish a fuel support services contract covering the whole of UNMSIL’s ground fuel (Diesel) requirements in the mission area in Libya for a period of One (1) year with an option to extend the contract for Two (2) additional one-year periods subject to satisfactory performance of Contract by the Contractor and the availability of funds and extension of the Mission’s mandate.
The requirement will be for an approximate volume of 150,000 liters per year.
Specific Requirements/Information
- Delivery Requirement.
The contractor shall provide fuel (Diesel type) by truck delivery to the UNSMIL office in OEA village upon receipt of a signed UNSMIL Fuel Request.
The fuel shall be delivered 24 hours after receipt of the UNSMIL Fuel Request mentioned above.
- Requirement Variations. The potential Contractor must be fully aware that the UN shall not be required to purchase any minimum quantity, nor be limited to purchase any maximum volume of fuel.
The Mission will provide the Contractor with adequate advance notice of any significant change in consumption of fuel projected by the Mission, whether overall or at any particular Distribution Point.
- Source of Supply.
The contractor may use any source of supply for fuel that meets the specifications to support UN operations.
Each delivery has to be supported with a quality control certificate or batch laboratory test certificate to be provided/handed over to the UN representative.
Additional laboratory tests or quality control documents may be requested by the UN at any time to ensure the product quality and conformity.
- Fuel delivery.
The contractor shall deliver the fuel to UN-designated tanks using a proper fuel truck that meets the international or national diesel fuel industry requirements.
The fuel delivery truck must be equipped with a pump and a calibrated meter; in Liters (calibration certificate shall be provided by the contractor to UN when required by the UN at any time).
The quantity of fuel received is controlled by flow meters mounted on each UN fuel tank.
Any mismatch between the contractor & UN meters, the UN flow meter quantity is to be considered as actual received quantity.
• Equipment Standards.
All fuel equipment, such as trucks, trailers, pumps, and related dispensing equipment provided by Contractor, must conform to applicable industry standards.
Such equipment shall be certified by the equipment manufacturer and/or an independent inspector as fit for intended use.
• Fuel Meters.
Meters shall be used by the Contractor for all fuel issuance.
The design, operation, performance, and calibration shall be in accordance with applicable law and industry standards.
Meters’ calibration certificates may be requested by the UN at any time for verification.
• Fuel Truck Requirement.
The contractor’s fuel delivery trucks must be equipped with camlocks or adapters to connect to the inlet of the UN storage tank.
The track also needs to be equipped with a pump and a calibrated meter.
All security and safety requirements for fuel handling must be observed, such as adequate fire extinguishers, placarding, a spillage kit, and a first aid kit.
Required Products - Specifications
• Compliance with Product Specifications.
The contractor is required to provide products that conform to the required international and local standards accepted and maintained by the major petroleum companies in the world.
In addition, fuel is to conform to the requirements of one or more of the following authorities, as appropriate.
• BS EN 590
• Cetane no.51
• The American Society of Automotive Engineers (SAE)
• The American National Lubricating Grease Institute (ANLGI)
• American Petroleum Institute (API)
• The European Automobile Manufacturers Association (EAMA)
• The British Standards Institute (BSI)
• US military specifications or Commercial Item Descriptions
• American Society for Testing and Materials (ASTM)
Quality Control and Assurance, Environmental and Security Considerations
• Contractor Quality Control & Quality Assurance Program.
The Contractor is required to describe in its technical proposal the Quality Control & Quality Assurance Program.
• Fire Prevention and Control.
Contractor shall render his services in strict compliance with Industry Standards and Applicable Law in order to implement adequate fire prevention and control plans and procedures at all locations where Contractor operates pursuant to the contract.
• Security Measures.
The Contractor shall render its services in strict compliance with industry standards, UNSMIL guidelines and applicable laws in order to safeguard its employees and secure all property, materials, supplies and equipment.
-Contract Administration
• Contractor Personnel.
The Contractor shall be responsible for the professional and technical competence of its personnel and will select reliable individuals who will perform effectively under the contract.
The Contractor shall ensure that its person
CONTACT:
• Email: procurement-unsmil@un.org
Data provenance
This notice is sourced from UNGM - United Nations Global Marketplace and was originally published on June 8, 2026. Last refreshed 1 day ago. BidsFactory mirrors official procurement notices and links back to the source for full legal text.
About UN Secretariat
UN Secretariat has issued 383 procurement notices on BidsFactory, including 52 currently open and 0 awarded contracts. Activity concentrates in General Supplies & Services, Construction & Civil Works, and Architecture & Engineering Services. Tenders span 10 countries including Senegal, Chile, and Mozambique. Notices are distributed via UNGM - United Nations Global Marketplace. Most recent publication: June 18, 2026.
Frequently asked questions about this tender
When does this tender close?
The submission deadline is June 21, 2026. Proposals must be received by the contracting authority before that date.
Who is the contracting authority?
This notice was issued by UN Secretariat in Libya. The authority is responsible for evaluating bids, awarding the contract, and managing performance.
What type of contract is this?
This is a Services contract in the Architecture & Engineering Services sector. The classification helps bidders match the opportunity to their qualifications and registered scope of supply.
Where will the contract be performed?
The contract is for delivery in Libya. Foreign bidders should review local registration, taxation, and any in-country presence requirements before submitting.
How can I submit a bid?
Visit UNGM - United Nations Global Marketplace to access the full notice, required documents, and submission instructions provided by the contracting authority.
Find tenders like this automatically
Set up alerts and filters that match your business — never miss a relevant opportunity again.
Sectors & Categories
Key Details
Contracting Authority
Contact
Companies That Won Similar
Companies with awards in Architecture & Engineering Services in Libya